This is the Platform Library implementation for the BugBlat Cortino3RE.
http://www.bugblat.com/products/cor.html
We have found that debugging is unreliable when powering the Cortino3RE from the barrel connector. Always power the board from the USB connector.
Examples require a SparkFun microSD shield.
Examples require a NuElectronics ENC28J60 shield.
There are no built-in graphics. You can enable graphics by editing example_plugin_graphics.c and selecting an appropriate graphics adapter.
The platform I2C bus routing is:
The platform SPI bus routing is:
***../../samples/BugBlat_Cortino3RE/platform_config.h not found ***