STMicroelectronics STM32 USB-FS-Device Library Updates

STMicroelectronics STM32 USB FS USB Device Library Updates

CrossWorks Version 4 Installation Instructions

To install this support package

1. Click the Tools > Package Manager menu option to open the package manager window.
2. Right click on the STMicroelectronics STM32 USB-FS-Device Library Updates entry and select Install Selected Packages.
3. Click Next to take you to the summary page.
4. Click Next to install the package.
5. Click Finish to close the package manager window.
6. Click the Tools > Show Installed Packages.
7. Click on the STMicroelectronics STM32 USB-FS-Device Library Updates link to view the package and its contents.

To manually install this support package

1. If you have not done so already, follow the CMSIS 3 Support Package, CrossWorks Tasking Library Package and STMicroelectronics STM32 CPU Support Package installation instructions.
2. Download the file stm32_usb_fs_device_lib_updates.hzr using your web browser.
3. Click the Tools > Manually Install Packages menu option.
4. Select the file you have just downloaded to install the package.
5. Click the Tools > Show Installed Packages.
6. Click on the STMicroelectronics STM32 USB-FS-Device Library Updates link to view the package and its contents.

To install this support package using other versions

• CrossWorks Version 1 Installation Instructions
• CrossWorks Version 2 Installation Instructions
• CrossWorks Version 3 Installation Instructions

Release Notes

1.0

• Initial Release.

Documentation

1) Installation

You should download and install stm32_usb-fs-device-lib.zip from the STMicroelectronics website.

When you install this package you will be prompted for the STM32_USB-FS-Device_Lib installation directory. This package will add CrossWorks project files to the STM32_USB-FS-Device_Lib installation directory.

The CrossWorks package installation process will set the CrossWorks global macro STM32_USB_FS_DEVICE_LIB which is used by the CrossWorks project files to refer to STM32_USB-FS-Device_Lib directories and files. If you subsequently move the STM32_USB-FS-Device_Lib installation directory you should modify this macro using the "Tools | Macros" dialog.

This package has been tested on a subset of the examples supplied with version 3.4.0 of the STM32_USB-FS-Device_Lib package.

2) Template Project Files

Template project file for the supported ST EVAL boards are provided:

• STM3210B-EVAL (click to load project)
• STM3210C-EVAL (click to load project)
• STM3210E-EVAL (click to load project)
• STM32L152-EVAL (click to load project)
• STM32L152D-EVAL (click to load project)

After the required project file is loaded:

• Right click in the solution node in the project explorer and select Save Solution As...
• Navigate to the appropriate example directory (e.g Mass_Storage) and specify a filename to save.
• If you are using CrossWorks for ARM 2.0.7 or earlier you will need to load the newly created project file using File | Open Solution... If you are using CrossWorks for ARM 2.0.8 or later then the newly created project file will be loaded for you.
• You will need to remove either system_stm32f10x.c or system_stm32l1xx.c from the project Source Files folder depending on the evaluation board you have.
• Use Build 'Project' to build the example.
• The project will build the evaluation board specific utilities files which may not be appropriate for the example. These files are in the Utility Files folder and can be removed from the project or you can right click on the file and select Exclude From Build.