![](images/nxp.png)
NXP LPCXpresso LPC1115 Board Support Package
Warning: This is a legacy package, it has been provided to keep existing projects working and is not recommended for new projects. This package has been replaced by NXP LPCXpresso LPC1115 Board Support Package.
This package contains project templates, system files and example programs for the NXP LPCXpresso LPC1115.
CrossWorks Version 2 Installation Instructions
- To install this support package
-
- Click the Tools > Package Manager menu option to open the package manager window.
- Right click on the NXP LPCXpresso LPC1115 Board Support Package entry and select Install Selected Packages.
- Click Next to take you to the summary page.
- Click Next to install the package.
- Click Finish to close the package manager window.
- Click the Tools > Show Installed Packages.
- Click on the NXP LPCXpresso LPC1115 Board Support Package link to view the package and its contents.
- To manually install this support package
-
- If you have not done so already, follow the CMSIS 3 Support Package and NXP LPC1000 CPU Support Package installation instructions.
- Download the file NXP_LPCXpresso_LPC1115.hzq using your web browser.
- Click the Tools > Manually Install Packages menu option.
- Select the file you have just downloaded to install the package.
- Click the Tools > Show Installed Packages.
- Click on the NXP LPCXpresso LPC1115 Board Support Package link to view the package and its contents.
- To install this support package using other versions
Release Notes
1.1
- CTL projects now default to a process stack size of 256 bytes. Please note that existing CTL projects will need to specify a process stack size using the Runtime Memory Area Options > Process Stack Size project property in order to work with CrossWorks for ARM version 2.3.1 onwards.
- Increased default main stack size to 256 bytes.
1.0
- Initial Release.
Documentation
Known Problems
CrossWorks does not support the LPC-Link debug interface. We have found however that you can use the LPCXpresso boards with supported debug interfaces such as CrossConnect, J-Link and FTD2232 devices by connecting pin 1 of the 10-pin SWD/JTAG connector (VCC) to 3.3V. If you do this, you do so at your own risk.