ARM mbed NXP LPC1768 Board Support Package

This package contains project templates, system files and example programs for the ARM mbed NXP LPC1768.

CrossWorks Version 2 Installation Instructions

To install this support package

1. Click the Tools > Package Manager menu option to open the package manager window.
2. Right click on the ARM mbed NXP LPC1768 Board Support Package entry and select Install Selected Packages.
3. Click Next to take you to the summary page.
4. Click Next to install the package.
5. Click Finish to close the package manager window.
6. Click the Tools > Show Installed Packages.
7. Click on the ARM mbed NXP LPC1768 Board Support Package link to view the package and its contents.

To manually install this support package

1. If you have not done so already, follow the CMSIS 3 Support Package and NXP LPC1000 CPU Support Package installation instructions.
2. Download the file mbed_NXP_LPC1768.hzq using your web browser.
3. Click the Tools > Manually Install Packages menu option.
4. Select the file you have just downloaded to install the package.
5. Click the Tools > Show Installed Packages.
6. Click on the ARM mbed NXP LPC1768 Board Support Package link to view the package and its contents.

To install this support package using other versions

• CrossWorks Version 3 Installation Instructions
• CrossWorks Version 4 Installation Instructions

Release Notes

3.4

• Removed CrossWorks Platform API examples.

3.3

• Added IoT examples.

3.2

• More examples.
• Added CoreBASIC interpreter example.

3.1

• Added stand-alone solution files.
• Separated platform headers to reduce project dependencies.

3.0

• Added Platform API examples, sensor examples, shield examples, mass storage examples, and TCP/IP examples. These examples run on an mbed with the mbed Application Board, the ELMICRO TestBed, or the Seeed Studio mbed Shield. For the TestBed and mbed Shield, you can run all our standard Arduino examples.

1.0

• Initial Release.

Documentation

Troubleshooting

To download and debug programs on this board you must use CrossWorks' CMSIS-DAP target interface.

The CMSIS-DAP target interface has only been available in CrossWorks since version 2.3.0 so make sure you are using this version or later.

CMSIS-DAP was not supported in early versions of the mbed firmware therefore you may need to update the board's firmware for this interface to work. We have also observed that you need to download and install the latest Windows device drivers if you have older versions of the drivers installed.