![](images/nxp.png)
NXP LPCXpresso LPC1114 Board Support Package
This package contains project templates, system files and example programs for the NXP LPCXpresso LPC1114.
CrossWorks Version 3 Installation Instructions
- To install this support package
-
- Click the Tools > Package Manager menu option to open the package manager window.
- Right click on the NXP LPCXpresso LPC1114 Board Support Package entry and select Install Selected Packages.
- Click Next to take you to the summary page.
- Click Next to install the package.
- Click Finish to close the package manager window.
- Click the Tools > Show Installed Packages.
- Click on the NXP LPCXpresso LPC1114 Board Support Package link to view the package and its contents.
- To manually install this support package
-
- If you have not done so already, install the following packages:
- Download the file NXP_LPCXpresso_LPC1114_V3.hzq using your web browser.
- Click the Tools > Manually Install Packages menu option.
- Select the file you have just downloaded to install the package.
- Click the Tools > Show Installed Packages.
- Click on the NXP LPCXpresso LPC1114 Board Support Package link to view the package and its contents.
- To install this support package using other versions
Release Notes
3.2
- Corrected constant section name used when compiling CMSIS system code.
3.1
- Now uses CMSIS 5 packages.
3.0
- Initial Release.
Documentation
Known Problems
CrossWorks does not support the LPC-Link debug interface. We have found however that you can use the LPCXpresso boards with supported debug interfaces such as CrossConnect, J-Link and FTD2232 devices by connecting pin 1 of the 10-pin SWD/JTAG connector (VCC) to 3.3V. If you do this, you do so at your own risk.